If you tow often you’ll want to make monitoring exhaust gas temps your highest priority. Although there is no definitive temperature that keeps you in the safe zone, the most commonly adhered to safety threshold for maximum sustained EGT is 1,250 degrees F. Going beyond that should only be done in short intervals, such as allowing EGT to creep up to 1,300 or 1,400 degrees while climbing a grade. Expect to see 300 to 400 degrees at idle, 700 to 800 degrees cruising empty and anywhere from 900 to 1,300 degrees (depending on your truck’s level of modification, the load it’s hauling or the terrain you’re covering) when cresting a hill with a trailer in tow.

In terms of type of nozzle, the automotive fuel injector market can be segregated into single-hole nozzle, multi-hole nozzle, pintle nozzle, and Pintaux nozzle. In a single-hole nozzle injector, only one hole injects the fuel, while in a multi-hole nozzle injector, more than one hole injects the fuel. The number of holes in a multihole nozzle injector can vary from 4 to 18. In a pintle nozzle injector, the stem of the nozzle is extended to form a pin, or pintle, which protrudes through the mouth of the nozzle body. In this injector, the spray angle is generally 600. The Pintaux nozzle injector is a type of pintle nozzle in which an auxiliary hole is provided. Small amounts of fuel is injected from this auxiliary hole before main injection.

Effective filtration systems always have played an integral role in the daily life of a truck’s lubrication, air intake and fueling processes. They contribute to increased operating uptime, reduced emissions, better fuel economy, reduced wear and tear on the engine and even the quality of air delivered into the driver’s cab. As technology continues to exert a larger influence on the operation and maintenance of diesel trucks, the demand on suppliers of filtration systems to up their game and keep pace has never been more important, industry experts said.

Preference Driven Layout Overview of Global Smart Washing Machine Market 2019 in Research Sector and Consumer Preference Till 2024. Global …

Honda added balance shafts to the engine on the Accord in order to reduce vibration and make it run smoother. Since these shafts are integrated into the oil pump assembly, the pumps between two engines are completely different. Even with the addition off all of these extra parts, the pump assembly for the Accord is still cheaper than the version for the Type R.

That kind of torque on demand makes for incredible fun whenever you punch the go pedal—no matter the rpm. This particular FE will be going into a 1964 Ford Galaxie, which is no kind of a lightweight. With all that torque on hand, this modern interpretation of Ford’s classic FE is exactly what the doctor ordered!

Most of the people overlook the condition of wiper blades because they are not used often. You may get surprised to see that they are not properly cleaning the windscreen in case of rain. To avoid such helpless scenario, it’s recommended to often check the wiper blades and rubber to see if they need replacement. Moreover, a damaged or old viper blade may also cause streaks on the windscreen hence causing a significant damage to the surface of the glass in the shape of scratches. You often see round scratch marks on the windscreen of cars. This is the reason behind such marks. A windscreen is not inexpensive by any means and you don’t want to change it due to such little negligence.

It seems that many owners are adding catch cans to their PCV systems. Looking at the specs for the latest generation GM 3.6 liter V6 – the “LGX” – I noticed they’ve now added (without fanfare) an oil separator to their fuel system. That sounds promising.

LED accent lights are dying left and right, necessitating the swap out of the entire headlamp assembly (which ain’t cheap).

Takeuchi equips its machines with one to two fuel filters and a water separator to help remove contaminants and water that can damage sensitive HPCR systems.Because of the design, HPCR systems also deliver better atomization of the fuel upon injection, delivering a cleaner, more powerful and more complete combustion. Engines equipped with HPCR provide cleaner exhaust, deliver more horsepower and fuel efficiency per displacement than previous models. 

Any thoughts on the MG3 and ZS. They are both well within my price range and I am attracted by their 5 and 7 year warranties. I am 76 so they should see my driving days out.JH, Kettering 

The fuel rail made from plastics supply fuel to the injectors, which are directly mounted on it.  In such type, there are only minimal pressure fluctuations between single injections and the fuel is ready along with the required injection pressure at the start of the infusion. Moreover, the pressure in such automotive fuel rail is dually controlled either by a pressure controlled valve or by a demand-driven pump. The application of high-pressure automotive fuel rail is in the fuel supply systems for gasoline direct injection engines and are applied as the piping between a high-pressure injector and a high-pressure pump.